If you are encountering login problems please check here
Search Results
https://turboford.org/thread-new-volvo-swap-engine-project?highlight=toyota%2Bcrank
678
strainer off end of suction line in spray gun
881
I would guess this is the customer. https://www.enginelabs.com/news/2-3-liter-ford-hits-770whp-shatters-stock-focus-st-block/
1,595
Esslinger just put this on Facebook It's official! We have been commissioned to design and machine a batch of billet 2L/2.3L Ecoboost blocks. Priced at $7,999 it will require that we make at least 4 i...
1,595
https://carbuzz.com/news/more-powerful-ford-mustang-svo-ecoboost-could-still-be-coming
2,266
https://www.motor1.com/news/329157/ford-debuting-entry-level-mustang/
2,266
3M seam sealer tape https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Seam-Sealer-Tape/?N=5002385+8709313+8710891+8711413+3293193967&rt=rud
362
Was a Facebook post. If they are doing final machining I suspect it has a buyer.
396
is being machined with no plans for any more production.
396
I have seen trs j76 superchargers for sale for a while now for $550-$650, just a Chinese belt driven turbo. Map shows 550-600 cfm but I have seen 0.5 or 0.7 a/r with 76 mm housing. Which is best for...
227
Flattening a large pipe would be a lot less work than welding that long a seam 4 times
1,284
I'd go with a nut splitter on ones that bad. $12 at Advance Auto
610
Even if the tank were good, the pressure would likely separate the plastic pump halves.
346
You could find a tank that would hold pressure and tie it to intake and then add the pump if you like to play
346
I did one back in '70's with the Ford economy light switch, an aquarium needle valve and a windshield washer pump. Worked fine on a 10:1 383 but you should also add an ignition kill oil pressure swit...
346
https://www.youtube.com/watch?v=nBPeQG40sI4 Volvo adds an onboard compressor and storage tank. When you mash the gas the air is dumped into the exhaust manifold to spool the turbo.
89
How about a stepped stud? https://www.belmetric.com/metric-studs-metric-step-studs-6810mm-c-9_73.html
392