If you are encountering login problems please check here
Search Results
I found one on ebay. Wondered if it would be worth it to get. Should flow better than what I have. Holset turbo (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2453695841&category=33...
363
I have both the front and rear bars from an 88 tc. They are significantly bigger than the stock bars on my 85 svo. Eric
229
I pulled the codes with all tests and the only code it gave was knock sensor not detected. I knew this since it has been disconnected for quite some time. 2 years ago I replaced the o2 sensor, over th...
87
Well I took the test again. I still failed the Idle emmisions on HC. Only thing is that they went up. State says 220 is the limit, first test I blew 335 on 46lbs fuel and premium grade, this test I bl...
87
Oh, behold the wonders of the Brown Bomber. As soon as you fix this problem something else will happen. I love these cars. Could you go to upullit for me today after your party and get me my sway ba...
234
I stuck on some cheap jamex springs with a 2" drop. I had to roll the rear fender lip to get the 235/40/17 tires to fit. I hate the ride, guess the saying "you get what you pay for" is true. These wer...
386
I failed the Idle HC part (max-220, blew-335). Everything else passed with flying colors.I am running the A-237 cam set at 0 adv/ret, timing is at 10 degree with spout out. The only other thing is tha...
147
It is only difficult on the rear window since the defrost is there, the rest you can just use a razor blade on. For the rear this is how you do it. "Trust a tinter" on this one. 1. get a large black ...
171
Look at the svoca site, I just got a flyer from them for the fabric. OEM style isnt cheap. Or post on there site, someone will know how to get it. Eric
80
I say it never leaned out because the plugs werent white, the gauge never went below full rich, there was no sign of lean burn in the cylinder or on the gasket and I never once heard pinging. On ano...
341
Thats as far as the gillis valve would screw in. However i just got back on the tow truck. I guess I shouldn't have used the cheapy head gasket. If you look at the head gasket, the #1 and 4 holes are ...
341
That was SO much fun. 22-23 psi and 15 degrees initial timing. No pingage what-so-ever. HaHaHa! I must say though. It becomes difficult to keep the tires from spinning when you do this. I think someda...
341
What do you all think would be a safe amount of base timing to run with a big NPR intercooler and 17psi max boost. I always run supreme 92 octane on the street. I currently am running 14 degrees base ...
34
I was gettting on it pretty good and the damn cap blew off pretty hard. Hit the hood, no damage luckily, and then bounced down the road. Gotta go get one now. I am wondering what would cause a pressur...
159
Keenan Since you are in that far I still think you should do my idea of welding up all the small(and useless) holes that are all over the place. Its time consuming but it will look sweet when you are...
219
I have the same problem, only mine rumbles and hums from 30 MPH on up. My LSD still works fine. What do you think this means? Time for a rebuild? Eric
125
I had mine off (broken actually) for a while and my E6 cracked. About an inch or so. Maybe just coincidence. I dunno. But It did. Now its fixed and I still use it. I'd rather have the security of the ...
80
Here is where I got my pump. A.P.E. (http://www.autoperformanceengineering.com/)
39
I have decided to build a good short block now and install an Essy head later on down the road. Probably within a year. I am having a hard time deciding weather to go with a 5.5" rod or the stock 5.2"...
85
Hey Boostn Since my motor is apart do you think I could bring it down to you and we could powdercoat it. I want to get my car goin again before the rains comes back. Let me know Keenan. Eric
163