If you are encountering login problems please check here
Search Results
Quote: -- Originally posted by xrattiracer: on thinking about this a bit more, what speed sensor are you using here? the ones used in the 80s (on turbocoupes and such) are a simple reed switch, abou...
881
I measured it against an Escort tranny in the the J/Y for you last year. It came out to about 6" longer (from the back of the block at the bellhousing to the end of the gearbox at the wheelwell). Im...
2,712
MTX75 from a Focus, Contour or Escape (AWD). That would be the strongest FWD manual that will bolt to a 2.3T. It's basically the same tranny as the MT75 as used behind the Cosworths (2WD and AWD), e...
2,712
Quote: -- Originally posted by MerkXRTurbo: Also, remember that tow dollies don't have trailer brakes. -- :nono: Not true my tow dolly has electric (not surge) full size brakes just like any othe...
3,851
They won't let you test drive it. Friend of mine is a Saturn salesperson, and she can't even get one out for a drive. GM's production is small and so most cars that are on the lots are already spoken...
1,540
Quote: -- Originally posted by DPDISXR4Ti: Why? Best I can figure (and I'm pretty sure I'm right), the garage settled and crimped off every line. :mad: -- How much wiring have you done before...
2,415
You only have to run one supply line, use a 4 gallon water heater for hot water, and use PEX. You can pressurize PEX to 100PSI, freeze it (it won't burst like Copper,Iron, CPVC) beat the sh!t out of ...
2,415
If you have the room I would suggest a over pooring 2" of concrete and install radiant floor heating using OB-PEX and a cheap/used water heater. Skip using drywall on the walls at least, it gets to...
2,415
isn't that pretty close to the 2.95 1st mustang box? As far as ratios? And a new T-5 is maybe half that price? What are you planning on doing with the extra overdrive? And try 4.44 out back. Just l...
478
Quote: -- Originally posted by my8950: So the ones you listed will all work? the trans I have is from an 88TC, going in an 86 XR...hopefully, all i have right now is the trans -- Is that a wide tun...
1,232
If you guys aren't taking it above 5k, get new valve springs. With the valve springs sorted you should be shifting at the rev limiter. If you're shifting at 5k with stock gearing, you'll end up with...
1,387
Quote: -- Originally posted by 70 eliminator: i have 3 extras and cant figure out what to do with them but i am thinkin a tube chassis econo box 1 or 2 seater with a 2.3 -- RWD Focus.
737
Foxes have sh!t for rear travel. You would have to do alot of cutting and welding. If you already are stuck w... I mean have a Mustang, why not try this to improve the handling- http://www.turbofo...
737
Quote: -- Originally posted by Red_LX: Quote: -- Originally posted by havinidleproblems: Where can you find those heims you use? -- Summit sells em... -- www.colemanracing.com (http://www.cole...
1,825
Depends on who you talk too. Just think, though, the 5.0 has twice as many pistons. And remember that when people start telling you it's the same weight as a 2.3 4 cylinder, or that an alu. headed 5...
373
Quote: -- Originally posted by Red_LX: I don't know how I would keep all the weld splatter off the V-band flanges. . -- "Pam" cooking spray. Or any anti splatter spray from the welding supply.
1,134
EEC-IV does a very poor job of keeping a consistant idle in the best of conditions. It seems the only mechanism for control available to it is that linar actuator motor.
472
Heads up on pistons being "discontinued"; manufacturers make a run of replacement pistons. Those pistons are stocked and it may take years before another run is needed. So there is some lead time be...
490
In a pinch a mustang 4 speed will bolt right up, but getting the T-9 or Mustang box in and out is a real pain in the a$$. And I think the Scorpio T-9 has a different input shaft.
180
Quote: -- Originally posted by bhuff: you can take the T3 elbow to nearly 2.5" and still get it to seal. -- You can make it bigger then 2.5", I've done it. I would guess it works better with a 3...
264