Thanks Ray, but I reached out to Chip Givens and he was able to hook me up. 👍🏻

Hey y'all, I'm looking for the block plate for an automatic transmission, part number E3TZ-7007-B.  Anyone got one they'd be willing to part with? I might also be interested in the torque converter a...

Chuck/Dolphin - thank you for the reassurance that drilling/tapping for this hole is fine. Ray - I only have the TC intake so it's the former... I want to install the 4-square on a head seemingly d...

Thank you for the response, Ray.  I ask because I bought a performance head and had it stored for 4 years, only to discover yesterday that I don't have all the required bolt holes for my TC lower...  ...

Do all stock turbo heads use the same lower intake bolt spacing, or were there differences between the inline style and the square style lowers?

Zane, I received the o-rings yesterday. Your measurements were spot on - 33mm O.D., 28mm I.D., 2.5mm thickness. That's the closest match to the cracked o-ring I've been able to find. As Ray mentioned,...

Thunder, you are too kind, sir. I will PM my address to you shortly. :)

I have tried Fel Pro 5511, and unfortunately it is much larger (see linked image below). CODF-12143-A (or DZ-4) is listed in the Ford Master Parts catalog as the correct Distributor Base Gasket for 80...

Does anyone have a source for these? I've measured my (now cracked in 4 pieces) o-ring to be: 33mm OD, 28.5mm ID, which puts the width at 2.25mm. McMaster-Carr has some Buna-N and Viton rings that a...

Thanks guys, I appreciate your input. Is the valve cover breather really necessary? If I went with the catch can, I could add some steel wool just below the can's inlet, like Stinger and others have ...

Thanks Ray!

Quote: -- Originally posted by booostalotopuss: Check Stingers sight , he has the how to on this one . In the FAQ section :thumbup: Billy :cheers: :burnout: -- Sorry for reviving a...

Do you happen to know what year truck?

Ray: I agree! Hence why I'm so interested in finding out which Fuso had this particular IC. :D According to the link that Jerry provided, the CORE is 22" x 12" x 2"; each end tank is 5", for a to...

Thank you for all of the replies! Jerry: I did not see his post on FordPinto.com, but you are right, that's him...he's been MIA from FP since 2009 :rolleyes: Ok, so we know it's from a Mitsubi...

Ray: It's not mine or I would use it...the picture I'm showing was downloaded from TF user turbowagonman's Photobucket...he hasn't responded to PM or a comment on that website. He hasn't been on here ...

This is turbowagonman's FMIC. It measures 32" x 12.5" x 2", with 3" inlet/outlets. He hasn't been active on TF for some time, so I was wondering if anyone had any ideas as to this intercooler's origin...

Wouldn't hesitate to transact with again...thanks Sean!

From what I can tell, the large NPR intercooler was used from 1999-2004 in the 4.8L diesel turbo box trucks. I have found two part numbers: 8972183941 & 8972183942. Check this out: http://www.fordpi...

If still available, I'll take the crank hub and pulley for $30 shipped.