If you are encountering login problems please check here
Search Results
Your readings look proper to me so it doesn't appear you've found the rich condition. Look at the usual stuff: Fuel pressure, leaking injector(s), install a new oxygen sensor (it could be giving in...
870
According to the Esslinger catalog of years past, in the Technical Section: "Oil pick-up should be 1/8" to 3/16" from the bottom of the pan to the bottom of the oil pick-up."
526
FYI: There's some differences between the 85 and 86 SVO, so being more specific would be helpful (in-line vs square intake, for example). Your best bet is to locate the EVTM (Engine Vacuum Troubleshoo...
3,693
The "Goose" test in KOER comes AFTER the engine RPM rise and return to the previous idle value. The tester will flash a single flash to perform the goose test. When that flash happens, go to WOT immed...
383
I once worked as a Dragon Slayer before I was later trained to be a Stage Coach Driver in my younger years. Doth that qualify me to slayeth (is that a word? *) trolls?? * Third-person singular sim...
2,785
Yes, the turbo is spinning whenever the engine is running. The IHI spins about 25,000-30,000 RPM at idle.
1,108
Rick, Sorry to hear about you reaching ESRD (End Stage Renal Disease). I have been on hemodialysis for just over 3 years now,. Dialysis is not as much fun as some folks say it is, but it will keep y...
842
Did they use apples as footwear on the desks? Asking for a friend..
1,235
What oil should I use in My Tesla3??
4,512
TurboRay Wrote: (04-21-2021, 11:09 PM) -- . Unfortunately, however, I've heard that the thin-walled bushings have a tendency to crack &/or fail prematurely. Hopefully, someone with more T5 experienc...
6,769
Yes, but ... For 85+ turbo, 85.5 SVO the hoses connecting to the turbo coolant pipes are 1/2". They went to something like 10mm for the IHI turbo in 87/88.
1,931
It isn't necessary to remove the head to R&R valve stem seals. I would recommend to replace all seals at the same time.
1,370
Somewhere in the attic I have a pair of 87/88 TC taillight assemblies.
1,656
TurboRay Wrote: (01-19-2021, 09:19 PM) -- Howard Wrote: (01-19-2021, 08:15 PM) -- That looks like an "inline" intake, Ray, instead of an SVO...? -- . That's because it IS .an inline SVO intake, How...
6,023
TurboRay Wrote: (12-13-2020, 05:37 PM) -- . Hmmmm........Howard's and my request that the 1-post troll "go away" looks way .outta place, now that Paul removed his post!  :dodgy:  FWIW, neither of ou...
1,680
MikeLTDLX Wrote: (11-05-2020, 02:54 PM) -- ... and it is the same issue with both, fuel pressure is dropping under boost. --  That the pressure drops at all sure points to insufficient flow from the ...
1,460
Stinger Wrote: (10-26-2020, 02:54 AM) -- Agreed, however even the dirt cheap cork gasket that comes in the Felpro gasket kits is significantly better than the blue junk. Just glue the cork one to the...
2,363