Ish Wrote: (01-19-2023, 02:15 PM) -- evintho Wrote: (01-19-2023, 06:02 AM) -- I Googled 'bob's log' and look what I found!  Put a straightedge on the flange to check, blast it, paint it and call it ...

TurboRay Wrote: (03-25-2022, 05:33 PM) -- Golypon Wrote: (03-24-2022, 02:47 PM) -- What kind of adapter would I need to run it on stock exhaust manifold? Do you think stock intake, exhaust manifold ...

Got the engine back with head studs, (among other things) https://i.postimg.cc/8CfgqhRj/DE7-C97-AC-90-EC-4-F0-C-B110-636-B37-ED9-DAD.jpg Probably gonna need a new gas tank.. regardless of rust eh?

Just planning for the worst. I figure it would probably smoke too. You shipped to the USA for $12? From the link you posted? All I see is ~$125 from Germany , DHL or UPS.

TurboRay Wrote: (11-07-2022, 09:07 AM) -- . Obviously, I'm not Matt (onesillynotch) ~ BUT.........my understanding is that one of the reasons his combo works so well is b/c of the custom 1-1/4" tubi...

working on getting my 7163 setup,, do you use a turbo blanket? Custom fuel rail? I'm trying to run mine off a stock e6 with a t25 adapter. You think I can retain the distributor on e85 with bigger in...

Clean

onesillynotch Wrote: (04-27-2022, 01:51 PM) -- Golypon Wrote: (04-25-2022, 03:25 PM) -- onesillynotch Wrote: (04-23-2022, 08:21 PM) -- Golypon Wrote: (04-12-2022, 08:48 PM) -- onesillynotch Wrote...

onesillynotch Wrote: (04-23-2022, 08:21 PM) -- Golypon Wrote: (04-12-2022, 08:48 PM) -- onesillynotch Wrote: (07-11-2019, 05:53 PM) -- Quote: -- Originally posted by TurboRay:   Quote: -- Or...

TurboRay Wrote: (04-14-2022, 06:57 PM) -- Golypon Wrote: (04-14-2022, 04:05 PM) -- Stock fuel tank is ok for e85? -- . Yours is galvanized steel, right? If so, I wouldn't be terribly surprised if i...

TurboRay Wrote: (04-14-2022, 12:56 AM) -- Golypon Wrote: (04-13-2022, 05:55 PM) -- Ok. Stainless hard lines are the best for e85? As they don't corrode, right? Is it worthwhile to convert to coil pa...

Ok. Stainless hardlines are the best for e85? As they don't corrode, right? Is it worthwhile to convert to coil packs and bypass the distributor or no? Too much hassle?

onesillynotch Wrote: (07-11-2019, 05:53 PM) -- Quote: -- Originally posted by TurboRay:   Quote: -- Originally posted by onesillynotch: (The EFR 7163) is the only turbo also that I'm awar...

TurboRay Wrote: (04-12-2022, 08:12 PM) -- Golypon Wrote: (04-12-2022, 06:14 PM) -- [1] Can someone recommend me some good headers for these that aren't prone to cracking? I don't believe Big R motor...

Can someone recommend me some good headers for these that aren't prone to cracking? I don't believe Big R motorsports has the log header anymore, or at least I don't see them on the site. The bo-port ...

Is this still for sale?

TurboRay Wrote: (01-24-2022, 06:00 PM) -- Golypon Wrote: (01-24-2022, 03:04 AM) -- Yeah 450hp is a little past my target mark. I feel like that would kinda be overkill and difficult to run reliably....

TurboRay Wrote: (01-21-2022, 07:54 PM) -- . I doubt that ANY current-generation turbo will give as good a combo of quick spooling and power potential as an EFR (perhaps one of the Garrett "GT" versi...

What do you suppose best street cam / turbo combination setup is? I would like to make reasonable power and be able to feel the powerband around town and such. Spool around 2,400? Maybe ~25 lbs of boo...

Zmans Wrote: (01-02-2022, 03:56 AM) -- Ray, 650 engine trans harness vam ecm included everything in tact. @"jahlive12" thanks. -- I got the same setup from a yard (engine trans ecu, etc) but I got ...