Search Results
Tweecer only works on the LA series right now.
Datch
2,094
He sells the hose kits also on his site that has the high temp hose for where it is needed.
Datch
622
I have not bought the lines yet, but I have gotten other things from him. Very high quality and real fast shipping. I think they would be the way to go if you have any doubts about the stock stuff. ...
622
Pit, I am in Winnipeg. Let me know this guys name and address if you have it. I will see what I can do for you. Hopefully it is the same guy that has his moter in at my engine builders right now. ...
625
It should work in my opinion, as long as you can get good airflow to it.
759
No there should be a 45 degree fitting that goes into the block.
1,146
I had similar problems. Check all your grounds really well. Mine turned out to be the chassis ground from the battery. Fixed that and all the problems went away.
Datch
509
Yeah those are all good points. I was looking at using the turbo block with 5.2 crower rods and a custom piston to keep the pin out of the rings. I forgot I changed my sig, it will be going in a 93 ...
2,472
Well thanks for those old posts Johnk, But what I am looking for is part numbers and suppliers, Not opinions. I read 7 pages of topics in the search function, lots of opinion but no one said the spec...
2,472
Valve is brand new. I only put a couple of spacers in as I was unsure if they were there to keep it from leaking under boost or not. More shims going in when the new head goes on.
1,440
Hey Guys, I searched but didnt find all the info I was looking for. Basically I need to know all the parts required for a 2.5 stroker. Part numbers and suppliers would be a huge benifit also. I kno...
2,472
Mine doesnt die or anything, it is just when I put my hand over the outlet at idle in the garage it is sucking air. I will try adding more washers next.
Datch
1,440
I will try that, thanks guys.
1,440
Hey Guys, Been playing on the car recently and noticed the blow off valve is sucking at idle. It is a turboxs type RFL. I was just wondering if I have it hooked up wrong. I ran the vacuum line from...
1,440
I went blow thru with mine also. I got a 3" mandral bend and made the fenderwell cold air intake. Fits perfect but also had to loosen the spring.
699
Thanks Ray, These sound pretty specific acording to my engine builder. One gives an intake measurement of 1.850 and the other says 1.850 x 2.350. The later is the one I assume I would need. The fi...
540
Does anyone know the right part number for the Cometic intake and exhuast Gaskets. I have a couple of numbers here but I am not sure if they are the right ones. Any help out there.
Datch :tfrules:
540
Hey Guys, Just getting the car up and running. Was wondering what the Vam Voltage should be when running at warm idle. Right now it is at 0.78v but I had to loosen the vam spring three notches to ge...
598
Yeah it runs fine. I know it is rich but dont have a wide band o2 yet. Just wondering if anyone knew exactly what the codes mean.
615
Hi Guys, I just pulled the codes off the car for the first time and was wondering if having the Vam set up as a blow through would cause the codes I am getting. I bought a cheap code reader so I dont...
615