If you are encountering login problems please check here
Search Results
Quote: -- Originally posted by litlespic: how does the carbon build up and plugged cat hurt? carbon build up would help againts boost because not as much 02 can get to the chamber.. or is there some...
1,291
I remember back when I had my 88hatch with the t-bird motor that I wasn't able to have a/c with the t3 on there. The back of the t-3 would interfere with the accumulater. I was wondering if there was ...
160
Master cylinder # D9AZ-2140-A Prop valve # E0ZZ-2B257-A The proportioning valve will have to be modified though. Didn't see anything about the brake booster.
516
I have a manual for the rear disc swap in a mustang using t-bird rear brakes, and it gives the part number for the parking brake cable. It is M-2A809-A. HTH
516
When I used to rev my car it would make a few psi at high rpms. Defenitly check the wastegate rod though.
223
To adjust mine i had to take the center cam bolt loose along with the other 5. hth
351
ok thanks....btw i fixed my backfiring problem, boost went to 24psi!!! But the car felt faster with 20 psi though.
202
anybody?? http://ubb.turboford.org/confused.gif
202
Update: I retarded the timing and set the spark plug gap to .025. It doesnt "backfire" anymore in the low gears, but it does pull to 20psi!!! I havent had a chance to try it out in 4th or 5th yet. -...
336
Well thanks to you guys I finally am able to adjust my cam, the question now is where to set it at? My cam is a crane cam with .420 inck lift on the intake and exhaust side. Degrees duration @ .050 in...
202
Well, today conrad and I installed the walbro 255 fp hoping it would fix my problem. The problem is that when boost suddenly hits 17 psi the car makes a bunch of little "backfires" and stops pulling. ...
336
oh I get it, I was trying to turn the cam bolt. d'oh! edit: I tryed to turn the crank bolt and the cam still turns! http://ubb.turboford.org/confused.gif [This message has been edited by OLD79 (e...
259
I bought my adjustable cam gear from tiny avenger a little while ago and now i'm trying to adjust it. I loosened all of the little bolts the hold it together and tryed to turn the center bolt but the ...
259
First trip to the dyno in the turbo stang. 195.5 hp @4200rpms 243.4 ft/lbs @4200 rpms these runs were made with 17 psi. I couldnt pull all the way to redline because of lean backfires due to the sto...
312
Thanks guys.... where can I get another WGA, autozone?? How much will one of these cost?
511
yea the c-clip is in place. I got the turbo off of an 86 merkur. Will I be able to see the theads on the rod??
511
Ray, I see what your saying, but how do I shorten the rod??? Also, I've noticed that on the highway when I get on it 4th gear, boost shoots up to 13 psi(which is where I want it) but right after that,...
511