Thanks Dan!

Does anyone know how to change the EATC system display from Celsius to Fahrenheit?  I had mine out to work on the blend doors and when I reinstalled it is now showing the temp in Celsius (at first I t...

I need a good horn button for 87-88 Turbocoupe.  The plastic bits on mine all broke off and the button falls out of the steering wheel. connexx92@yahoo.com  - George

OK I took the blower box apart and I found a nest!  It  was plugging up everything including the little hose that goes up to the thermistor sensor that tells the EATC Climate Control the air temp.  I ...

Thanks Ray & Dan. Looks like I'm going to have to pull the dash to see what is up with the blend door and actuator.

TurboRay Wrote: (12-05-2024, 06:43 PM) -- Fast88 Wrote: (12-03-2024, 09:44 PM) -- I don't see a way to post a pic.  I think you put links in your post, but it doesn't let me click on them  -- ...

I don't see a way to post a pic. I think you put links in your post, but it doesn't let me click on them "(former) '78 2.3T Courier w/blow-thru Autolite 2bbl carb ~ (current) '87 2.3T Ranger w/...

Looking for a working heat control valve for 1987-88 Turbocoupe.  Valve sits near the firewall, in the hose that lets hot water into the heater core, it has a 2-wire connector on top.   My car has the...

It only skips a tooth when I turn it backwards, it does fine going CW. Maybe I didn't have the tensioner set tight enough - I was able to push the roller in against the belt so it is tighter now. ...

TurboRay Wrote: (10-28-2020, 06:46 PM) -- . 1) What cam do you have? Are you sure its' base circle is reduced (not all aftermarket cams are)? -- My cam is a custom cam made by a local outfit (Delta ...

Yes but then I also figured something else out. After opening up the engine and checking the valvetrain again, it looks like the lifters were shimmed too high. When I took out the .035 shims, it ru...

Not yet.

Racingjake Wrote: (10-09-2020, 09:44 PM) -- I'd check the following, Cam timing Ignition timing Firing order Compression test Leak down test Since you went with bigger injectors do you have a Pimp ...

TurboRay Wrote: (10-02-2020, 09:07 AM) -- [2] I wuz wrong once B4, BUT......your description sounds as tho you simply bolted the vernier/adjustable cam sprocket onto yer cam and ASSumed that it was 2...

I've worked on engines for a long time, but this one has me stumped.  This is going to get technical - I need some expert help.  First some background. I just rebuilt my 2.3L Turbo engine.  Bottom en...

I just rebuilt my Turbocoupe engine and I have a Porsche style Bypass Valve on the intake, connected to the stock intercooler that sits in front of the throttle body. I did put in a bigger cam and mi...

I like the idea of moving the belt guide behind the aux shaft sprocket. Thank you TurboRay for explaining it in a way I can understand (I'm a little slow, but my car isn't).

I have Ford Racing M-6256-A321 Cam Sprocket. To change degrees, you remove the gear and rotate it to a new keyway, and bolt it back down.

I have a Ford adjustable cam gear I am installing on my Turbocoupe.  Do I really need to keep the giant washer/cover that goes between the stock gear and the cam?  I would like to leave it off so I ca...

It still doesn't boost past 15 psi with hose blocked off. And the needle on the gauge wavers at the top (not steady). So I would hook the spring between the end of the rod where it connects to th...