If you are encountering login problems please check here
Search Results
only blown one 8993 in the 10 years I've had my XR running. I got a bit too aggressive on timing with crappy 91 octane gas.
1,272
did they happen to send a cam card with that cam? I'm curious of the specs.
10,910
what do you have for brakes? I'd love to go back to a 15" wheel.
6,341
Quote: -- Originally posted by svojohn: Yes the plenum is just over twice the displacement. Basically a 6 inch tube cut and spread open with a 5.5 flat sheet on the bottom. I use Pipemax and Engine...
14,526
Quote: -- Originally posted by shadowwolffe: I need the gromet number. -- sorry, don't have it.
1,209
SN95 fuel rail flows a bit better than the Fox rail. If you want an extra margin of safety I'd suggest the SN95 rail. Its a good budget upgrade without having to go to aftermarket rails. Pair it with ...
899
I like my torque arm. I use the standard duty, had it in for over 10 years now and given it hell. Last time out I was cutting 1.5x 60fts on 17" ET Streets and I know I'm well over the torque rating. ...
953
Care to post your VE map? I'm curious if it has the same pattern as mine.
3,120
This may help some of you wanting to run a 3/4" hose from the valve cover to a breather tank. It's a 90 degree elbow that fits perfectly in the large valve cover grommet. The Dorman part number is 47...
1,209
Quote: -- Originally posted by Bob_Myers: Not an issue now as I have all bronze forks in both my transmissions. -- Where did you get those?
1,056
Looking for the 45 degree brass fitting that threads into the block for the stock turbo drain tube. Need ASAP. Thank!
407
Quote: -- Originally posted by TurboRay: LINK (http://forum.turboford.org/ubb/ultimatebb.php?ubb=get_topic;f=6;t=017662) -- thanks, but the 2.1 has more than .450 lift. A 1.9 would be nice, or ...
423
Looking for a .450 max lift hydraulic cam. Let me know what you have.
423
Quote: -- Originally posted by NigelM: Quote: -- Originally posted by my8950: .. the diaphragm failed. Actuator arm is still connected, flap moves easily. -- To havw repeated diaphragm rupture...
16,603
been breaking too much on the street to even make it to the track.
4,343
Looks like its spooling up just fine to me. Comes in at 3700rpm with a GT35R, seems reasonable to me. Your lowest timing will be at peak torque then feed in from there. I'be been doing 1 degree per 10...
2,910
I used the 990s to replace my BoPort springs and they dropped right in using the existing retainers. I shimmed them .090" for a 1.460" installed height. The springs look similar, but the 990s are st...
1,457
I had Bo's drop in springs. I was having a problem getting past 5500 rpm and the springs tested at 70lb seat. I bought a set of 990 springs and they worked with the retainers I had. Installed height...
1,500