If you are encountering login problems please check here
Search Results
i watched some of the video and he did mention megasquirt a few times so it is definitely megasquirt inspired. my concern with those avr chips is they just dont have much power. no problem running a ...
858
MLS gaskets are all i will use. supposed to have a smoother finish put on the block and head to get them to seal better, but i have never done so. i just use a little copper spray to help seal it up a...
3,007
thats a good chunk of a standalone system that can offer safety modes like that too.
831
you can play with lean burn at cruise, but my (limited) attempts just showed me that this engine doesnt respond well to it. i ended up with a modified turbo diesel to solve the problem. it makes for a...
1,618
i made my own brackets. mainly because i am not using stock power steering pump or alternator
623
wouldnt take much code to make up a simple arduino type circuit to do something like that, including reading temperature sensors.
927
so far as i know there really shouldnt be any that arent compatible. racetronix.com has a good selection of low and high impedance injectors for good prices, i have a set of 80 lbs high z ones from th...
1,527
some googling says that is lined with synthetic rubber. i dont know how that compares to natural rubber, but their own FAQ recommends 6000 series (which is teflon lined) for E85.
1,527
Quote: -- Originally posted by SVslow: Target AFR's will remain the same as used for gasoline. -- actually lambda remains the same, but AFR does change significantly. but since the wideband meter i...
1,527
that will get you going, but the spark table can be adjusted for more optimal power too; E85 can handle more advance. basically you should completely retune it. also need to make sure your fuel system...
1,527
no significance to that, ford just had two different styles at the time. probably early/late model thing, although i have seen a pretty good mix at junkyards.
781
most of the aftermarket aluminum or steel ones are 9-10 lbs. i have seen a 6 lbs one too for those that really like nvh :) I bought a steel one from john vanlandingham that he had made up, its somew...
1,494
if we were here for "drivability" we would all have slushboxes, right? ;)
1,494
MS3 1.4 beta has support for the Holset VGT controller. Hooks up via CAN bus.
1,108
when it was just technology in the way, thats a learning curve that can be bypassed. now these things have DRM, which is not only a technological limitation but a legal one too. yes, it can actually b...
2,221
Quote: -- Originally posted by 4-barrel Mike: I must be too old. Vehicles with four doors are only good for large trucks like my SuperCrew and soccer moms. Mike -- I'm with you 100% on this! :D ...
2,221
beer and pizza you say? youre talking my language :) stinger, the mod flashes the check engine light when the ecu knock detection code triggers, its not straight from the sensor. and as stinger is s...
1,647
i had 3.73 with a TC T5 for awhile. it was great at the track, but freeway driving wasnt fun. I am trying to decide between 3.73 and 4.11 for a T5z now...
637
if it helps any, i angled the flange on mine: https://lh4.googleusercontent.com/--7DcDS6n6IQ/UbOfevOcR5I/AAAAAAAAChs/TdIWNxDsGz8/w1172-h879-no/IMG_20130608_141707.jpg that was to get the exhaust hou...
1,032
i wrote that swap article (thats my website). while i did run the dodge ecu for a few years and felt that it was a huge upgrade from the eec stuff, i did eventually want more than what even it could p...
1,647