Looking for the turbocharger water outlet tube from an SVO. It's the tube that comes out of the side of the turbo and tees into the tube at the valve cover. Thanks.

Does anyone know the axle flange offset for the SVOs with the stock 7.5 and stock length SVO axles? Thanks.

TurboRay Wrote: (06-28-2022, 06:44 PM) -- jimtash Wrote: (06-28-2022, 01:19 PM) -- Car has Willwood front brakes on it. Less than 1500 miles on a brand new kit.  -- . Were you experiencing the "sha...

Racingjake Wrote: (06-25-2022, 05:37 PM) -- Maybe the races wasn't seated fully ? -- Car has Willwood front brakes on it. Less than 1500 miles on a brand new kit.  What I can tell everyone is th...

I had them rebalanced Friday and the vibration is still there. What I want to know has lowering the car caused it? I installed Motorsport B springs that took it down about 1-1.5 inches in the front. T...

TurboRay Wrote: (06-25-2022, 05:13 PM) -- . Tapered roller bearings, like those used in front-wheel bearings and in differentials, are supposed to be preloaded, Jim. When repacking 'em, I was taught...

I believe it's solved. Had the tires rebalanced and nothing changed. Also replaced the driveshaft and that actually made an improvement in NVH. But what really helped was putting a half turn on the fr...

Racingjake Wrote: (06-20-2022, 02:47 PM) -- I have a friend that had a vibration and he unbolted the driveshaft from the rear end and rotated it 180 degrees and it went away, weird. When I bought ...

Long story short, steering wheel likes to sometime shake at highway speeds. Also sometimes the shifter bounces in sync. And when the shaking steering wheel stops, I can definitely feel a vibration in ...

fastsvo Wrote: (09-25-2021, 04:06 PM) -- Did you come across anything weird when you took apart the rear calipers? -- Nothing weird. The pistons were rusted though from the car sitting. I replaced ...

OK here's a quick update. All vibrations are gone. Driveshaft was actually bent at one end and the powertrain shop repaired it. All the tires were road forced balanced. And the braking issues were sol...

BoostedShay Wrote: (09-01-2021, 01:19 PM) -- How old are the tires? If they have a few years under their belt, I would start there even if they show no obvious wobble. Tires will do weird things. -- ...

The engine mounts were replaced when I installed the engine with stock units. The trans mount is the original one. One other thing I left out is that I hear a humming noise coming from the rear at...

TurboRay Wrote: (08-31-2021, 06:24 PM) -- . 1. Warped rotors/drums: The fact that stepping on the brakes increases the vibration/shaking almost ALWAYS points to wobbling rotors, Jim. I know you insta...

Hi guys. I've had an issue with my SVO with steering wheel and driveline vibrations for a while now. The front end has been completely rebuilt from ball joints to steering rack. I also installed an al...

I repaired a leaking cam seal today and everything went fine until start up. Banging from inside the valve cover from a collapsed lifter that bled down while I was replacing the seal. It finally built...

Can anyone point me to the correct rear wheel stud for an SVO with disc brakes? There are several different ones listed that have various knurls and lengths. Thanks.

Should come out of the same loom as the headlights. Trace the left light wiring to just behind the radiator support. Don't know if the stock TC fan is a single or two speed unit. Single is 2 wires an...

Not hard at all. You do need a press though. I rebuilt mine and it was the first transmission I ever did.

I'm running stock 225/50/16 BF Goodrich Sport Comps and they suck in cold weather. Broke the rear end loose power shifting from 1st into 2nd. Temps were in the 20s.