If you are encountering login problems please check here
Search Results
The best way to really know is measure it under the car. I just had an aluminum driveshaft made for my 88 and I needed to measure from the slip yoke hole centerline to the rear diff flange surface wit...
259
I'll check when I get home from work today. Been a while and I don't remember if I sold them or not
449
I have a few aftermarket goodies for sale: - Heath 23parts aftermarket motor mounts for late 86 to 88 TC and 86 Cougar XR7 with the 2.3. Were on the car for 5ish years. Selling because I bought a d...
161
If you want ARP flywheel bolts, look for ARP 151-2801
272
I have thought about doing it myself. This car is a project of how ridiculous I can make the modifications so there's a ton of work on it and a ton left to do. A lot of which I am learning for the fir...
602
I have called a few places already and each one said no. They wouldn't do a reseal without new rear glass. I'll keep making phone calls
602
My understanding is that there are different trim designs based on the year turbo coupe. I believe 87 and early 88 cars had a multi piece gasket design while late 88 vehicles went to a one piece seal....
602
The rear window seal on my 88 TC is in dire need of replacement. I've call multiple shops/mobile services and no one will do just a window reseal (from what I was told by these companies, new rear gla...
602
Did a search and didn't find anything. I know there was an option for the 87-88 turbo coupes to have the towing package which included a tow receiver hitch. Does anyone have a picture of what this loo...
361
I unfortunately don't have any updates on this at the moment. It has been on the back burner due to other priorities with the project. My setup is a bit different in that I have a fuel cell in the...
2,295
Thank you Chuck; that all makes sense. I actually just got off the phone with Mike over at MM and he explained that using the lower “mustang” shock mount on the rear end will not allow enough travel d...
2,295
Thanks Chuck, did you mean to say that the mustang shocks are 3" shorter than the stock tbird shocks? Currently, I'm running the 79-04 Mustang Koni single adjustable struts in the rear with the maximu...
2,295
Did a search and couldn't find anything that addressed the question I have. I know there are a few forum members who have installed a Foxbody MM Panhard Hard bar on their tbirds. My question is what d...
2,295
Might be an anomaly? Unfortunately, I didn't check the original pickup tube and pan clearance when I was taking apart my stock motor. Would have been nice to see what that clearance was from the facto...
526
For my new motor, I'm running a Kevko Racing F800RR pan. It has a prevision for an aftermarket dipstick. I will be going this route since the pan has slightly more depth than the stock pan. My questio...
303
Thank you Ray; I spoke with Kevko and they recommend 1/4" to 3/8" clearance for the pickup tube to oil pan. As a FYI to anyone in the future reading this, I went with a different pan from Kevko. I bou...
526
Update: bent the pickup tube a small amount. Checked clearance again across different parts of the oil pickup. The lowest part is now .365 inches with the highest part being .65 inches. The highest pa...
526
In the process of assembling my new 2.3 motor and I checked the clearance of the oil pickup tube to the bottom of the pan. I got .62 to .71 inches across the oil pickup tube. My service manual doesn’t...
526
Found out the thread size is 5/16 - 24 for anyone who needs it in the future.
3,135
Sorry, MGW shifter has sold. Just updated the post
518