[SVONOLES]

Does anyone have these on their SVO (Pics if you do) or know if they the SVO hub will stick out past the center cap?

TIA

http://www.allfordmustangs.com/forums/at...eb3-1-.jpg

[TurboRay]

Sorry, I don't have the info you need - but I've always liked those late Mustang V-6 wheels.....GOOD LUCK! :thumbup:

C'ya - RAY

[JonnyG23T]

My svo
http://i570.photobucket.com/albums/ss149...a162f6.jpg

,

[JonnyG23T]

I can't post multiple links on my phone http://i570.photobucket.com/albums/ss149...3ae6a8.jpg

[SVONOLES]

Jonny, thanks for the links but look at the pics of the wheels I posted. Probably the 16" V6 wheels...

[SVONOLES]

Originally posted by TurboRay:
Sorry, I don't have the info you need - but I've always liked those late Mustang V-6 wheels.....GOOD LUCK! :thumbup:

C'ya - RAY

So do I Ray. Have a chance to get a mint set locally for $200 but want to make sure they fit 1st...

[Scotty Boy]

Garfield,
I believe they are like the Bullitt wheels I had on my SVO. You'll need to grind down the SVO spindles and flatten the grease cap to be able to mount the center cap on the wheel.

[CruzNlife1]

Be advised, with the 2005+ mustang wheels you may want/need a small wheel spacer. The backspacing is different. They will fit, but a larger tire will likely rub, and they will be deeper into the wheel well

I know it's not a fox body but the same applies and it gives you an idea

http://i.imgur.com/NXP8xso.jpg

[Foolee]

The hub size needs to be ground down to 70.3mm. I had the end of my hub machined down on my Cobra brake kit on my Ranger. Although before I put my Cobra brake kit on I used the grinder method. Put a screw driver in the vents and turn the rotor while grinding. Ranger guys have to do the samething. Ranger guys run 5/16" and no caps or 7/16" with caps. Idk about SVO's though.

[stott]

it looks better without the center caps!