If you are encountering login problems please check here

1989 Bronco II
#1

Hi everyone, you may have seen this truck on the Facebook page, I got rid of FB so here I am.

It’s a bronco II with an 88 Turbo coupe motor.
I wired almost everything up to work as factory, even the octane switch.
It has a 4” lift with long travel radius arms.
Was trying to do things the way it would be in 1989 so there’s no light bars or 18” wheels here.
[Image: 77-B0-F51-D-BECA-495-B-A995-364-AA941-EF05.jpg]
[Image: A112278-F-5528-45-B4-BDE1-CC4-C68-D50-FF7.jpg]
[Image: 51-F5-B57-E-0-BBE-4721-B9-E4-0-FBF00-AB357-D.jpg]
Reply
#2

WELCOME to TurboFord, Bob!  <thumbup>  2.3 Bro II's are rare.....AFAIK, Ford sold very few of 'em.

I don't know what you're seeing on your end, BUT.......the images you posted from "imgbb.com" are not displaying for the rest of us.  <shrug>
Placerville, California
(former)  '78 2.3T Courier w/blow-thru Autolite 2bbl carb ~ (current)  '87 2.3T Ranger w/PiMP’d EFI
Reply
#3

Yeah I was trying to figure that out,
Haven’t really done much on any forum since before photobucket stopped hosting.
Reply
#4

That is sharp!
88 TC: 2.9L tall deck, SVO head, boport header, sheet metal intake, BWS300SXE turbo, AWIC. C4 trans. E85
Reply
#5

(07-20-2021, 08:59 PM)Bob Ross Wrote:  Yeah I was trying to figure that out (pics).....

Well......you must've figured it out, cuz the pics are displaying now! Nice looking Bro II. <thumbup>
Placerville, California
(former)  '78 2.3T Courier w/blow-thru Autolite 2bbl carb ~ (current)  '87 2.3T Ranger w/PiMP’d EFI
Reply
#6

Had an '89 Bronco II once myself.  It left me when I got divorced Big Grin
If you happen to need a '89 factory service manual set, I guess I have one I don't need anymore Wink
Geoff - 85 XR DD back in service - with a vengeance!
"Beyond the Palace, Hemi powered drones scream down the boulevard" - Bruce Springsteen
Reply




Users browsing this thread: 1 Guest(s)