If you are encountering login problems please check here

88TC clutch slave cylinder retainer
#1

As the title says, am looking for retainer for the clutch slave cylinder for 88 turbo coupe. Also would be interested in the clutch fork boot, trans is a T5 world class, if it matters.
Lifting up Jesus.....
72 Courier w/1988 2.3T project
Reply
#2

.
Does it look like the one pictured below?

[Image: s0eXdHOAg0jujwEuhX_D_IDNNzg4oVwL2qtFBDXD...ckqz3farE0]

If SO......it uses a fork cover that serves as both "the boot" AND the slave-cyl retainer (LINK).  .[Image: confused0024.gif]
Placerville, California
(former)  2.3T '78 Courier ~ (current)  2.3T '87 Ranger & '82 Mazda B2200 (smog-exempt diseasel truck)
Reply
#3

No clue as to what the original(s) looked like. They (it) were missing when I got the donor car.
Lifting up Jesus.....
72 Courier w/1988 2.3T project
Reply
#4

.
I'll rephrase......Does your bellhousing look like the one in the above picture with the integral slave bracket? If so, you need the fork cover I linked. . [Image: confused0024.gif]
Placerville, California
(former)  2.3T '78 Courier ~ (current)  2.3T '87 Ranger & '82 Mazda B2200 (smog-exempt diseasel truck)
Reply
#5

Yes, that would be the correct cover. Forty bucks seems a little steep, hopefully one of our guys has one that they would part with for less than that.
Lifting up Jesus.....
72 Courier w/1988 2.3T project
Reply
#6

(05-17-2020, 02:44 PM)Floktndr Wrote:  Forty bucks seems a little steep..... 
.
I'll rephrase again......"you need the fork cover like I linked."  .[Image: happy0024.gif]

Perhaps a post in the WANTED .section would serve you well.  .[Image: confused0024.gif]
Placerville, California
(former)  2.3T '78 Courier ~ (current)  2.3T '87 Ranger & '82 Mazda B2200 (smog-exempt diseasel truck)
Reply
#7

LOL, this is the wanted section, and I hope it does yield results. But you are right, you did say "like". At least you helped me get my head screwed on straight, I now know what kind of part I am looking for.
Lifting up Jesus.....
72 Courier w/1988 2.3T project
Reply
#8

(05-17-2020, 09:14 PM)Floktndr Wrote:  LOL, this is the wanted section......
.
Well......in that case, excuse me while I reach back and extract my rectally-inserted head!!  .[Image: banghead.gif]
Placerville, California
(former)  2.3T '78 Courier ~ (current)  2.3T '87 Ranger & '82 Mazda B2200 (smog-exempt diseasel truck)
Reply




Users browsing this thread: 1 Guest(s)