If you are encountering login problems please check here

Canfield or Stinger 2.3 Liter Ford Bellhousing Adapter Plate
#1

Finally converting from the 2.3 Bell to a 5.0 Bell. Hoping someone out there might have a spare plate kicking around they don't need.
Reply
#2

I was looking for one and could not this was the only place I could find one https://www.stinger-performance.com/stor...r-flywheel
88XR4TI:T67/T4 Turbo,85lb inj,PIMPV1.3,LS2-Coils,255LPH,3" exh, Stg4 Head, BoPort Header, Bob's Inline, Cus.body kit, 16" Rims, Supra 3.73 LSD, Rasp.PI3 dash
Reply
#3

Yes Shannon @ Stinger has the flywheel which I will be buying. I'm specifically looking for the block to Bell adapter plate.
Reply
#4

.
That's gonna be a hard find, Morph! Used ones DO come up for sale occasionally [ EXAMPLE ], but it's rare. There a lot of other 2.3-related sites and FB groups, so I suggest putting a "Wanted" ad in all that you can find. If no luck, you may wind up having to "pop" for the retail price.  <shrug>
Placerville, California
(former)  '78 2.3T Courier w/blow-thru Autolite 2bbl carb ~ (current)  '87 2.3T Ranger w/PiMP’d EFI
Reply
#5

Hope you have better luck than I did.  I bought mine  from this supplier http://cididit.com/adaptor_plate.htm  in 2012 and have had it sitting on the shelve until this weekend.  I think the price is relatively the same since I bought it then.
88XR4TI:T67/T4 Turbo,85lb inj,PIMPV1.3,LS2-Coils,255LPH,3" exh, Stg4 Head, BoPort Header, Bob's Inline, Cus.body kit, 16" Rims, Supra 3.73 LSD, Rasp.PI3 dash
Reply
#6

(10-25-2021, 10:28 PM)jahlive12 Wrote:  I bought mine  from this supplier http://cididit.com/adaptor_plate.htm  
.
That's Canfield Industries, JL......the maker of the adapter plates.  <shrug>
Placerville, California
(former)  '78 2.3T Courier w/blow-thru Autolite 2bbl carb ~ (current)  '87 2.3T Ranger w/PiMP’d EFI
Reply
#7

Retail price is fine, above retail is also fine, I've been trying to get in touch with Lonnie @ Canfield and haven't had any luck. I hope he's okay. I would also just buy directly from his website, but shipping is included thou I highly doubt that includes shipping to Canada. if someone lives near the area and is willing to go by and make sure things are okay that would be great. Heck, I'd be more happy to pay someone to broker the deal for me too!
Reply
#8

(10-26-2021, 04:47 AM)morpheus256 Wrote:  Retail price is fine, above retail is also fine, I've been trying to get in touch with Lonnie @ Canfield and haven't had any luck. I hope he's okay. I would also just buy directly from his website, but shipping is included thou I highly doubt that includes shipping to Canada. if someone lives near the area and is willing to go by and make sure things are okay that would be great. Heck, I'd be more happy to pay someone to broker the deal for me too!


Where in Canada are you? Although I don't think it matters, they're not letting us over, or you over here I believe.
Reply
#9

message me if you're still looking, I may have something available.
Reply
#10

PM has been sent, Thanks!
Reply




Users browsing this thread: 1 Guest(s)