12-12-2023, 12:03 AM
(This post was last modified: 12-12-2023, 12:05 AM by
TurboRay.)
(12-11-2023, 06:04 PM)svomgb Wrote: Actual strip results: best ET 14.30, best MPH 101.5
Not too shabby,
Dennis! Fast enough to out-accelerate probably 95% of the cars on the road, lol. However, I'm surprised that it didn't go into the 13's, since your
"crank hp" is probably at least 250+ with 22 psi boost. I ASSume you were still babying it off the line and granny shifting (as before), to keep your diff gears and rear-tire tread intact? <shrug>
Placerville, California
(former) '78 2.3T Courier w/blow-thru Autolite 2bbl carb ~ (current) '87 2.3T Ranger w/PiMP’d EFI
My shortblock is old with lots of blowby. I doubt I'm making 250HP. And I made no attempt to speedshift.
I have Folvo updates (with images) to post and I can't seem to figure out how to put them up. Any info?
1967 MGB roadster 2.3 turbo T5 7.5 PIMP FMIC 22psi
Now with Folvo head, 2.5 crank, PimPXS, and EFR 7163G twin scroll
.
Images/photos must be "hosted" by a site such as Imgur, Photobucket, etc., Dennis. Then you can enter the URL that's assigned to a particular hosted image into the dialog box that drops down when you click on the "photo icon" that appears among the posting choices whenever making a new post.
Clear as mud, lol? Whenever making a new post, you'll see a row of posting "choices" above the dialog box into which you type your post. If you have a hosted image, you can copy the URL assigned by the image-hosting site, then paste it into the drop-down menu when you click on the photo icon. Unfortunately, it's not as easy as FB, where you can simply copy and paste an image. <shrug>
Placerville, California
(former) '78 2.3T Courier w/blow-thru Autolite 2bbl carb ~ (current) '87 2.3T Ranger w/PiMP’d EFI
