If you are encountering login problems please check here

Horn wiring
#1

When I purchased the car it had some small aftermarket steering wheel.  Some years ago I purchased NOS steering wheel and horn pad.  There are 2 cut wires coming up through the column, I assume for the horn.  Does anyone have a picture of this wiring?  Was this wiring specific to the SVO or is it the same as other pre-86 fox body mustangs?  I'd like to get one off of someone parting out an SVO or maybe run to a junk yard to find one, if it's not SVO specific.
85 SVO, Bob's intake, Stinger FMIC,65mm TB, Bo header, 1.5 & big valves, + 85# inj. Waiting for MS3 ,3" exhaust and HX35 to be installed.
Reply
#2

Hey Mike, see if you can view the documents on this website:

http://www.rothfam.com/svo/reference/

There should be a schematic in there somewhere.

For whatever reason, the website wont let me access the directory, you may have better luck.
88 TC in Canyon Red
Walbro 255, AEM wideband, CP Pistons, FMIC, PIMP, SVO T3, Ranger roller, 3" Stinger exhaust, AFPR, RFL BOV, Gutted upper, Ported lower
Reply
#3

I have a column out of an 84 SVO that I am willing to part with. It would likely have what you need. $50 + shipping.
I want to live in a world where chickens can cross the road without their motives being questioned.

87 TC
Reply
#4

(01-27-2020, 11:37 PM)Michael F Wrote:  When I purchased the car it had some small aftermarket steering wheel.  Some years ago I purchased NOS steering wheel and horn pad.  There are 2 cut wires coming up through the column, I assume for the horn.  Does anyone have a picture of this wiring?  Was this wiring specific to the SVO or is it the same as other pre-86 fox body mustangs?  I'd like to get one off of someone parting out an SVO or maybe run to a junk yard to find one, if it's not SVO specific.

yep, runs to relay then horn, can’t remember if it operates from ground or power though.
2017 F150 Ecoboost 3.5 TT
2017 Mustang GT PP (sold)
2019 Mustang EcoBoost 
86 SVO not stock
83 Ford Ranger project
Reply
#5

(01-28-2020, 12:43 PM)Ductape Wrote:  
(01-27-2020, 11:37 PM)Michael F Wrote:  When I purchased the car it had some small aftermarket steering wheel.  Some years ago I purchased NOS steering wheel and horn pad.  There are 2 cut wires coming up through the column, I assume for the horn.  Does anyone have a picture of this wiring?  Was this wiring specific to the SVO or is it the same as other pre-86 fox body mustangs?  I'd like to get one off of someone parting out an SVO or maybe run to a junk yard to find one, if it's not SVO specific.

yep, runs to relay then horn, can’t remember if it operates from ground or power though.
                   
I want to live in a world where chickens can cross the road without their motives being questioned.

87 TC
Reply
#6

Yeah, that appears to be what I need.  I see the black and purple wires along with both connectors on them.  

It appears as there's something else I'm missing, but I'm not sure.
Reply
#7

(01-30-2020, 10:30 PM)Michael F Wrote:  Yeah, that appears to be what I need.  I see the black and purple wires along with both connectors on them.  

It appears as there's something else I'm missing, but I'm not sure.
Just one more photo that I had. I was limited to 5 on the previous post.


Attached Files Thumbnail(s)
   
I want to live in a world where chickens can cross the road without their motives being questioned.

87 TC
Reply




Users browsing this thread: 1 Guest(s)